80150 Pump
YSHX-80150 high pressure water pump is an ultra-high pressure plunger pump produced by the introduction of German technology. It is suitable for ultra-high pressure water jet cleaning, metal cutting, ship cleaning and rust removal, as well as condensers and heat in chemical plants, sugar factories, power plants, etc. Descaling and cleaning of various tanks and kettles of exchangers, evaporation tanks and boilers. It can pump clean water, emulsion, and other liquids with chemical properties.
YSHX-80150 series high pressure water pump features:
All made of high-strength stainless steel, which has good wear resistance, tensile resistance, compression resistance, corrosion resistance and long service life. The plunger is made of high-strength stainless steel as the matrix, plus a high-strength wear-resistant coating, with high smoothness, wear resistance and corrosion resistance. The water seal adopts imported products from Germany, which has strong sealing effect, wear resistance and can withstand 400MPa working pressure. The pressure end adopts an integral pump head design, and the replacement of the valve plate, valve seat, water seal, etc. does not need to move the pump head and only takes 15 minutes, and it can be done independently by one person.
Input Shaft Speed min-1 |
1480 |
Plunger Stroke mm |
120 |
|||||
Gear reduction ratio i |
4.04 |
Pump Speed min-1 |
366 |
|||||
Power KW |
90 |
110 |
132 |
160 |
Plunger Diameter mm |
|||
Flow rate |
Rated Pressure MPA |
|||||||
L/min |
M³/h |
|||||||
34 |
2.0 |
130 |
150 |
18 |
||||
40 |
2.4 |
115 |
140 |
150 |
20 |
|||
50 |
3.0 |
95 |
120 |
140 |
150 |
22 |
||
60 |
3.6 |
80 |
100 |
115 |
140 |
24 |
||
70 |
4.2 |
70 |
85 |
100 |
120 |
26 |
||
80 |
4.8 |
56 |
70 |
85 |
100 |
28 |
||
93 |
5.58 |
50 |
60 |
70 |
90 |
30 |
||
106 |
6.36 |
44 |
52.5 |
61 |
78 |
32 |
||
126 |
7.56 |
37 |
44 |
51 |
66 |
35 |
||
Single pump weight 870kg, liquid inlet G2 inch, liquid outlet M30*2 |