500bar-1500bar hydro blasting water jet nozzle.
Different spray angle: 0°, 15°, 25° .
For surface cleaning.
Water sand blaster kit
Match with 150-700bar high pressure cleaner, for rust, paint removal.
Good quality type hydro blasting water jet nozzle.
Rotating Nozzle
More effecient for cleaning after cleaner with such nozzle, compared with normal water jet nozzle.
150bar-500bar
Devil Nozzle
Single hole rotation, spiral water jet, 600bar-1500bar. The surface cleaning effect of the devil nozzle is good, and the speed is fast. The maximum working pressure is 1500 bar, the flow rate is 12-60L/Min, and the rotation speed is 1000-3000rpm , Simple maintenance.
Barracuda nozzle
A self-rotating flat cleaning head with a speed control system. Its light weight, simple maintenance, suitable for any type of high pressure pump. The leak-free seal design and the centrifugal speed control system in the cleaning head enhance the impact on the cleaning surface and improve the cleaning efficiency.
2 or 4 nozzles are available. 1500bar-2800bar
Standard Sewer Jetter Nozzle
40-500L/min, < 300bar
Sewer Drain Cleaning Nozzle
Max 350bar, 215L/min
150-600mm diameter sewer cleaning
Rambo Piercing Nozzle
135-315L/min， < 300Bar. Specially used for completely blocked sewers with hard silt. The front jet of the multi-angular Rambo nozzle and the drill bit are integrated at the same time. The tip of the drill bit penetrates deeply into the blockage, and the flow of water rushes through the blockage and flushes it back. The sprinkler always works in the middle of the pipeline, so the Rambo sprinkler can also be used for pipelines with misplaced joints. The drill bit can be replaced, the nozzle can be replaced, and the nozzle is made of steel, which has strong wear resistance.
Pagoda Rotating Nozzle
Pagoda rotating nozzles are mainly used for hard oil, tree roots and completely blocked pipes. 3kg heavy pagoda gun heads are suitable for high-pressure pumps above 130L/min, 5kg pagodas are suitable for high-pressure pumps above 215/min, and 200-600mm sewers respectively.
Mine Nozzle
1.5kg, 3.5kg, 4kg, 5.5kg, 7kg, 10kg.
130-300L/min
< 600mm diameter sewer cleaning
Push nozzle
The nozzle is made of special stainless steel, which is not rusty and highly wear-resistant. The nozzle can be replaced. Equipped with our company’s patented water guiding system, with two layers of nozzles and different spray angles. Not only accelerates the advancing speed of the nozzle, it is also particularly suitable for cleaning and dragging out the silt at the bottom of the pipeline. It is powerful!
600-1200mm diameter sewer cleaning. 170-315L/min, < 240Bar
Rotary cutting nozzle
Use the centrifugal effect and reaction force of the water flow to make the sprinklers rotate while spraying water. The high-pressure water flow at the front end forms a cross-cut and peels off the dirt on the cross-sectional area of the pipeline like a percussion drill to efficiently remove all kinds of dirt and hard dirt in the sewer pipe.
300-1000mm diameter sewer pipe cleaning.
105-350bar, 170-315L/min
Pipe cleaning nozzles
10mm-30mm outer diameter, large water flow rate
500-3000bar hydro blasting water jet nozzle.
Large industrial tube pipe cleaning nozzle
Great quality type hydro blasting water jet nozzle
Large industrial tube pipe cleaning nozzle
Large industrial tube pipe cleaning nozzle
High pressure and large water flow rate type hydro blasting water jet nozzle
Ultra-high pressure water rotating nozzle (witch nozzle)
Outer diameter 11mm, 13mm, 18mm. 1200-1500bar. 13-35mm tube cleaning.
1. The structure is simple and the design is unique, and only the stepped seal is used for the rotating shaft, and the sealing effect is better.
2. The overspeed rotation is further controlled, the impact force of the water jet is enhanced, and the cleaning efficiency is improved.
3. The water inlet is directly connected with the D4 and D6 flexible guns without transition joints, which is more convenient to use.
4. The elf nozzle has a large enough crawling force to easily clean the pipeline without installing a propeller.
5. All vulnerable parts can be replaced individually, easy to maintain, and the comprehensive use cost is further reduced.
Large industrial tube pipe cleaning nozzle
High-pressure three-dimensional 3D rotating nozzle
15-50L/min, 0-160bar
High-pressure three-dimensional 3D rotating nozzle
15-50L/min, 0-120bar
Foot Valve
The foot valve is a high-pressure, foot-controlled pressure switching control valve. It is installed between the water supply pipeline of the high-pressure cleaning water gun and the high-pressure water outlet pipeline of the high-pressure pump to control the water supply working state of the high-pressure pump.
Floor cleaning trolley
Max pressure: 2800bar
High rotary speed, Efficient for road marking removal