Working together with high pressure cleaner, also important for job.
For getting good cleaning result, both high pressure cleaner and accessories are important. Rotary nozzles, pneumatic gun, lances, are powerful for hard cleaning.
Maintenance of pipe cleaning nozzles
Although the high-pressure pipe cleaning nozzle is an accessory component of the high-pressure cleaning pump and does not attract as much attention as the high-pressure pump, its important role and use and maintenance cannot be ignored at all. The pressure and water jet output by the high-pressure pump, the last one The actuator is the nozzle. Pay attention to the correct use and cleaning of the nozzle on time to prevent malfunctions and ensure the normal operation of the high-pressure cleaning machine.
One of the important tasks in maintaining high-pressure nozzles is to clean the nozzles regularly to prevent clogging and maintain cleanliness and good spray performance. Pay as much attention to the maintenance of the nozzle as you do to the high-pressure pump. A fully or partially blocked nozzle may cause a significant reduction in water output and cause the high-pressure spray gun to vibrate during spraying. How to clean the high-pressure nozzle: first turn off the high-pressure spray gun switch and pull out the device; turn off the water supply system; then squeeze the handle two to three times to release the pressure in the hose; separate the spray rod of the spray gun from the spray gun body; remove the high-pressure spray gun Rotate the nozzle to the trickle setting state; open the fan page in this way, use the built-in nozzle needle, insert the needle wire into the hole of the nozzle, and then pull it back and forth until the impurity fragments in the hole are clean; reverse flush the water flow through nozzle to rinse away any remaining debris.